Universal Trunk Umbrella Holder for All Models | Waterproof

$12.50 USD

Universal Trunk Umbrella Holder for All Models | Waterproof

Name: Universal Trunk Umbrella Holder for All Models | Waterproof
Brand: Teskay
SKU: TSB014
Price: 12.50 USD
Availability: InStock

$12.50 USD

Order now, estimated delivery: Calculating...

Free shipping on orders over $99
30-day free returns & exchanges

Universal Trunk Umbrella Holder for All Tesla Models

Give wet umbrellas a dedicated place in your Tesla trunk. The compact waterproof holder mounts vertically along a suitable cargo-area side surface, helping contain dripping water while keeping umbrellas upright, organized and easy to reach.

All Tesla models · Waterproof ABS · Water-collection design

Universal waterproof trunk umbrella holder installed in Tesla cargo area

☔

Dedicated Umbrella Storage

Keeps compact and folded umbrellas upright instead of allowing them to roll around underneath groceries, bags or other cargo.

💧

Collects Dripping Water

The enclosed lower section catches moisture from a wet umbrella, helping keep water away from trunk carpet, luggage and other items.

🚘

Universal Tesla Fit

Designed as a universal cargo-area accessory for Model 3, Model Y, Model S, Model X and Cybertruck rather than a vehicle-specific molded insert.

Why This Trunk Umbrella Holder Is Useful

🌧️

Keeps wet umbrellas off the carpet

Instead of laying a rain-soaked umbrella directly on carpet or luggage, place it inside a dedicated waterproof container.

💦

Built-in moisture collection

Excess water remains inside the holder where it can be emptied later instead of spreading across the cargo floor.

🧱

Durable ABS construction

Impact- and wear-resistant ABS creates a rigid container that is easier to wipe clean than soft fabric organizers.

📏

Slim vertical footprint

At approximately 19.5 cm tall and only about 6–7 cm wide, it adds useful storage without consuming a large portion of the cargo floor.

🧼

Easy to empty and clean

When water or dirt collects inside, simply remove the umbrella, empty the holder and wipe the ABS surface clean.

More Than an Umbrella Rack

The narrow waterproof container can also be useful for other compatible wet or elongated small items, provided they fit safely inside and do not exceed the holder's intended mounting capacity.

Compact Storage for Rainy-Day Essentials

Universal umbrella holder installed vertically on Tesla trunk side wall

Vertical Side-Wall Placement

Keeps the umbrella near the edge of the cargo area so the main trunk floor stays available for groceries, luggage and larger items.

Wet folding umbrella being removed from waterproof Tesla trunk umbrella holder

Easy Umbrella Access

The open-top shape lets you insert or remove a folded umbrella quickly without opening a lid or storage compartment.

Slim universal Tesla trunk umbrella holder mounted beside cargo trim

Low-Profile Black Finish

Matte black ABS visually blends into dark Tesla cargo-area trim instead of drawing unnecessary attention.

Flexible Trunk-Side Installation

Model 3 Including Highland

Model Y Including Juniper

Model S / X Compatible

Cybertruck Compatible

1. Choose a Suitable Trunk Surface

Select a vertical cargo-area side surface where the holder can remain upright and will not interfere with the hatch, seatbacks or normal cargo loading.

2. Clean the Mounting Area

Remove dust, silicone dressing, oil and moisture from the mounting surface before applying the adhesive or hook-and-loop fastener.

3. Secure the Holder Vertically

Use the supplied adhesive / hook-and-loop retention method on a compatible surface and press firmly so the holder sits flat and upright.

4. Check Stability Before Use

Confirm the holder does not move under normal hand pressure before placing an umbrella inside or driving the vehicle.

Compact umbrella stored in universal Tesla trunk umbrella holder

Mounting Hardware Note

Current manufacturer text specifies high-strength adhesive mounting, while current product imagery also shows hook-and-loop strips and two optional fixing screws. Package hardware may vary by production batch. Use a non-destructive adhesive/fastener method whenever you do not want permanent trunk-trim modification.

Manufacturer-Listed Load Capacity

The current manufacturer listing states a maximum load capacity of approximately 10 kg (22 lb). Actual secure holding capacity still depends on the mounting surface, preparation and installation quality.

Specifications

Attribute	Details
Product	Universal Trunk Umbrella Holder
Compatibility	Tesla Model 3 / Y / S / X / Cybertruck
Refreshed Models	Model 3 Highland / Model Y Juniper Compatible
Material	Durable ABS Plastic
Water Resistance	Waterproof Holder Body
Primary Function	Umbrella Storage + Water Collection
Approx. Size	19.5 × 6.6 × 6.1 cm
Manufacturer-Listed Load	Up to Approx. 10 kg / 22 lb
Installation Location	Suitable Trunk / Cargo Side Surface
Primary Mounting	High-Strength Adhesive / Hook-and-Loop Retention
Optional Hardware	Some Current Product Imagery Shows 2 Fixing Screws
Color	Black
Cleaning	Empty Water / Wipe or Rinse as Needed
Main Package Item	1 × Trunk Umbrella Holder

Quick Answers

Which Tesla models does it fit? +

It is designed as a universal accessory for Model 3, Model Y, Model S, Model X and Cybertruck cargo areas.

Does it fit Model 3 Highland and Model Y Juniper? +

Yes. The current manufacturer FAQ specifically includes Model 3 Highland and Model Y Juniper within the universal fitment.

Is the holder waterproof? +

Yes. The rigid ABS holder is designed to contain water dripping from a wet umbrella rather than allowing it to reach the trunk carpet.

Where does the water go? +

Water collects inside the lower part of the holder. Empty accumulated water periodically rather than allowing it to remain inside.

What material is it made from? +

The current manufacturer listing specifies durable ABS plastic.

How large is the holder? +

Current product imagery shows approximate dimensions of 19.5 cm tall, 6.6 cm wide and 6.1 cm deep.

Does installation require screws? +

The current manufacturer description emphasizes high-strength non-destructive adhesive mounting. However, current product imagery also shows two optional fixing screws. If your package includes them, use them only if you intentionally want a more permanent installation on a suitable surface.

Will the adhesive damage the trunk? +

The manufacturer describes the supplied automotive adhesive as non-destructive. Adhesive behavior can still vary with surface material, age and temperature, so choose the mounting location carefully.

Can it hold a large umbrella? +

The manufacturer states that the holder can support compact umbrellas as well as larger folded umbrellas, provided the folded umbrella physically fits the opening and the mount remains securely attached.

What is the maximum load? +

The current manufacturer listing rates the mounting system up to approximately 10 kg (22 lb). Real holding strength depends on the trunk surface and correct installation.

How do I clean it? +

Remove the umbrella, empty any collected water and wipe the ABS interior clean. The waterproof holder can also be rinsed when removed from the vehicle, then dried before reinstallation.

You can contact Tesgod directly via the chat bubble in the bottom-right corner.
You can also reach our customer support team by emailing peng@tesgod.com.

We will respond to your message within 24 hours.

Yes, absolutely. Paying on Tesgod is safe and secure.

We use Shopify Payments, Shopify’s official payment system, to help ensure that every transaction is protected throughout the checkout process.

Bank-level security

Your payment information is encrypted and processed securely. We do not see or store your full card details.

Fraud protection

Shopify Payments uses advanced fraud detection and risk analysis tools to help prevent unauthorized transactions.

3D Secure verification

For some transactions, your bank may require additional verification to confirm that only the authorized cardholder can complete the payment.

Encrypted checkout

All payment data is protected with industry-standard encryption during the entire checkout process.

Trusted payment networks

Payments are processed through trusted global card networks such as Visa, Mastercard, and American Express.

In short, your payment on Tesgod is handled through a secure and trusted payment infrastructure used by millions of customers worldwide, so you can shop with confidence.

📦 Processing Time

Orders are usually processed within 48 business hours after payment confirmation.

Please note that processing times may be slightly longer during weekends, holidays, or peak periods.

Some Tesla-related tools or accessories may include labels or stickers inside the package for identification or packaging purposes.

🚚 Shipping & Delivery

We offer free worldwide shipping on orders over $99 USD.

Please note that certain remote areas, such as islands or locations with limited carrier access (including Puerto Rico), may require an additional shipping fee. If this applies to your order, our customer service team will contact you before shipment.

Estimated delivery time for most standard orders: 7–13 business days (excluding order processing time).

For custom-made items, such as wheels or steering wheels, shipping times may vary. The estimated shipping time will be confirmed separately by our customer service team.

📌 Important Notes

Please make sure your shipping address and phone number are accurate and complete at checkout.

Tesgod is not responsible for delivery issues caused by incorrect or incomplete shipping information provided by the customer.

Additional charges may apply for remote or hard-to-reach areas.

💬 Need Help?

If you have any questions about shipping or delivery, please feel free to contact our customer support team at peng@tesgod.com. We are always happy to help.

Thank you for choosing Tesgod ❤️

At Tesgod LLC, we want you to enjoy a worry-free shopping experience. If you are not satisfied with your purchase, we are here to help.

🔄 30-Day Return Policy

You may request a return within 30 days of receiving your order.

Please contact us within this period to start the return process.

📦 Return Reasons & Fees

Defective, Damaged, or Incorrect Items

If the item you received is defective, damaged, or incorrect, we can offer you a full refund or a replacement.

All related costs will be covered by Tesgod.
Non-Quality Returns

For returns due to personal reasons, such as change of mind, style preference, color preference, or ordering the wrong item, a 15% restocking fee will apply.

Return shipping costs are the responsibility of the customer.

📝 How to Start a Return

Please contact us at peng@tesgod.com or through our live chat first.

Once your return request is approved, we will provide you with the return instructions.

Please do not send the item back without prior authorization, as unauthorized returns will not be accepted.

🚫 Non-Returnable Items

The following items cannot be returned unless there is a quality issue:

Customized products, such as steering wheels and rims

Gift cards

Hazardous materials or flammable items

If you are unsure whether your item is eligible for return, please contact us before making a purchase.

💰 Refunds & Exchanges

Once we receive and inspect your returned item, approved refunds will be issued to your original payment method within 1–3 business days.

Please note that the time it takes for the refund to appear in your account may vary depending on your bank or card issuer.

If you would like to exchange an item, we recommend returning the original item first and then placing a new order.

💬 Need Help?

Your satisfaction is important to us. If you have any questions, please feel free to contact us at peng@tesgod.com. We are always happy to help.

Thank you for choosing Tesgod ❤️