Carbon Fiber Charging Port Protective Cover for Tesla Model 3 Highland / Model Y Juniper

Model 3 Highland / Glossy

$162.18 USD

Carbon Fiber Charging Port Protective Cover for Tesla Model 3 Highland / Model Y Juniper

$162.18 USD

Car Model Model 3 Highland Model Y Juniper

Carbon Fiber Finish Glossy Matte Forged

Order now, estimated delivery: Calculating...

Free shipping on orders over $99
30-day free returns & exchanges

Carbon Fiber Charging Port Door Cover for Model 3 Highland & Model Y Juniper

Give the factory charging-port door a lightweight carbon-fiber exterior upgrade while helping protect its painted or glossy outer surface from everyday scuffs, fingerprints and minor wear.

Carbon fiber construction · Glossy / Matte / Forged · No drilling

Carbon fiber charging port door cover installed on Tesla Model 3 Highland

🧵

Carbon Fiber Construction

Built from carbon fiber rather than a printed carbon-look plastic surface, creating a lightweight premium exterior appearance around the charging-port door.

🛡️

Surface Protection

Adds a protective outer layer over the factory charging-port door surface to help reduce minor scratches, fingerprints, stains and everyday cosmetic wear.

✨

Three Carbon Finishes

Choose Glossy, Matte or Forged to match other carbon-fiber exterior components and create the visual style you prefer.

Why This Charging Port Door Cover Stands Out

📐

Vehicle-specific outer profile

The cover follows the factory charging-port door shape instead of using a universal rectangular trim piece.

🔴

Factory red lens area remains exposed

A dedicated opening follows the factory red lens / reflector section so the original visible lighting element is not simply covered over.

🏎️

More performance-inspired rear styling

Carbon fiber visually contrasts with the body paint and rear lamp assembly for a sportier exterior detail.

🪶

Lightweight overlay

Carbon fiber provides the visual and protective upgrade without adding a bulky exterior housing to the charging-port door.

🔧

No permanent body modification

Current manufacturer guidance describes installation without drilling, cutting or special vehicle modification.

Exterior Door Cover — Not a Charging Receptacle Seal

This part covers the outside surface of the factory charging-port door. It does not replace the charging connector, weather seal or internal port mechanism and should not be treated as an additional waterproof cap for the charging receptacle.

Choose Your Carbon Fiber Finish

Glossy matte and forged carbon fiber charging port door cover finish options

Glossy Carbon Fiber

A reflective clear-finished appearance that makes the woven carbon pattern more prominent under sunlight.

Matte Carbon Fiber

A lower-gloss finish for a more understated OEM-plus appearance with reduced surface reflection.

Forged Carbon Fiber

A randomized chopped-carbon visual pattern for customers who prefer a more distinctive performance-inspired finish.

Forged Finish

The forged option creates a visibly different carbon pattern while retaining the same model-specific outer shape.

Woven Carbon Detail

Glossy and Matte options retain the familiar woven carbon-fiber appearance shown in the current product imagery.

Carbon Fiber — But Dry-Carbon Manufacturing Is Not Published

The current manufacturer describes this product as high-quality carbon fiber. It does not publish a verified dry-carbon, prepreg, autoclave or 3K manufacturing specification, so those terms are intentionally not claimed here.

Custom Fit with Simple Non-Destructive Installation

Model 3 Highland 2023.11+

Model Y Juniper Current TESGOD Option

Model YL Mentioned by Latest Source — Not Yet a TESGOD Option

1. Confirm Vehicle Generation

Choose the dedicated Model 3 Highland or Model Y Juniper configuration. Legacy charging-port door shapes should not be assumed compatible.

2. Clean the Charging-Port Door

Remove dust, wax, oil and detailing residue from the outer surface and allow it to dry completely before installation.

3. Test-Fit Before Securing

Position the carbon-fiber cover over the factory door first and confirm perimeter alignment and lens opening clearance.

4. Install Using the Supplied Mounting Method

Secure the overlay according to the supplied product instructions. No drilling, cutting or special vehicle modification is specified.

5. Check the Door Movement

Open and close the charging-port door carefully to confirm the overlay does not contact the surrounding lamp or bodywork.

6. Recheck Edge Seating

Inspect the perimeter after installation and ensure every edge sits evenly against the original charging-port door.

Before and after carbon fiber charging port door cover installation

Original Charging-Port Mechanism Remains in Place

This is an exterior overlay. The factory charging-port door, hinge, charging connector and electrical mechanism remain the original vehicle components.

Model YL Compatibility

The latest manufacturer selector now lists Model Y Juniper / Model YL 2026+, but the current TESGOD selector still offers Model Y Juniper only. Confirm Model YL charging-port door geometry before ordering until TESGOD adds a dedicated option.

Specifications

Attribute	Details
Product	Carbon Fiber Charging Port Door Protective Cover
Model 3 Fitment	Tesla Model 3 Highland 2023.11+
Current TESGOD Model Y Fitment	Tesla Model Y Juniper
Model YL	Listed by Latest Manufacturer Source; Not Yet a Dedicated TESGOD Option
Legacy Model 3 / Model Y	Not Listed
Material	High-Quality Carbon Fiber
Dry Carbon / Prepreg Specification	Not Published
Finish Options	Glossy / Matte / Forged
Installation Position	Exterior Surface of Factory Charging-Port Door
Factory Charging-Port Door Replacement	No — Exterior Overlay
Lens / Reflector Opening	Dedicated Opening Preserves Visible Factory Red Section
Main Protection	Cosmetic Surface Protection Against Minor Scuffs, Dirt & Wear
Additional Charging-Port Waterproof Seal	No
Drilling	Not Required
Cutting / Vehicle Modification	Not Required
Special Tools	Not Required by Current Manufacturer Guidance
Published Adhesive Brand	Not Published
Published Weight	Not Published
Published Dimensions	Not Published
Package	1 × Vehicle-Specific Carbon Fiber Charging Port Door Cover

Quick Answers

Is this made from carbon fiber or carbon-look ABS? +

The current manufacturer and TESGOD product specifications describe the part as high-quality carbon fiber, not carbon-look ABS.

Is it dry carbon fiber? +

A verified dry-carbon or prepreg manufacturing specification is not currently published, so this page does not describe it as dry carbon fiber.

Which finishes are available? +

Current options are Glossy, Matte and Forged carbon-fiber finishes.

Does it fit Model 3 Highland? +

Yes. The original manufacturer description specifically identifies Model 3 Highland from approximately 2023.11 onward.

Does it fit Model Y Juniper? +

Yes. Model Y Juniper is currently listed as a dedicated selectable option on both the manufacturer and TESGOD pages.

Does it fit Model YL? +

The latest manufacturer selector now lists Model YL 2026+ together with Model Y Juniper, but TESGOD currently does not offer a dedicated Model YL selector. Confirm compatibility before ordering for Model YL.

Does this replace the factory charging-port door? +

No. It is an exterior cover installed over the existing factory charging-port door.

Will it stop the charging-port door from opening? +

It is designed around the factory door shape so normal operation is retained when the correct model version is aligned and installed properly.

Does it block the red factory lens or reflector? +

No. Current product imagery shows a dedicated opening that leaves the factory red section visible.

Does it make the charging port waterproof? +

No. This cover protects the exterior surface of the charging-port door. It is not an additional waterproof seal for the charging connector or internal receptacle.

What protection does it actually provide? +

Its main practical protection is against minor exterior scratches, scuffs, fingerprints, dirt and everyday cosmetic wear on the original charging-port door surface.

Is drilling required? +

No. Current manufacturer instructions describe installation without drilling or permanent modification.

Is it installed with 3M VHB tape? +

The current product page does not publish a verified adhesive brand or specifically identify 3M VHB, so this description does not make that claim.

Are exact dimensions or weight published? +

No verified overall dimensions or product weight are currently published, so this page does not invent those specifications.

You can contact Tesgod directly via the chat bubble in the bottom-right corner.
You can also reach our customer support team by emailing peng@tesgod.com.

We will respond to your message within 24 hours.

Yes, absolutely. Paying on Tesgod is safe and secure.

We use Shopify Payments, Shopify’s official payment system, to help ensure that every transaction is protected throughout the checkout process.

Bank-level security

Your payment information is encrypted and processed securely. We do not see or store your full card details.

Fraud protection

Shopify Payments uses advanced fraud detection and risk analysis tools to help prevent unauthorized transactions.

3D Secure verification

For some transactions, your bank may require additional verification to confirm that only the authorized cardholder can complete the payment.

Encrypted checkout

All payment data is protected with industry-standard encryption during the entire checkout process.

Trusted payment networks

Payments are processed through trusted global card networks such as Visa, Mastercard, and American Express.

In short, your payment on Tesgod is handled through a secure and trusted payment infrastructure used by millions of customers worldwide, so you can shop with confidence.

📦 Processing Time

Orders are usually processed within 48 business hours after payment confirmation.

Please note that processing times may be slightly longer during weekends, holidays, or peak periods.

Some Tesla-related tools or accessories may include labels or stickers inside the package for identification or packaging purposes.

🚚 Shipping & Delivery

We offer free worldwide shipping on orders over $99 USD.

Please note that certain remote areas, such as islands or locations with limited carrier access (including Puerto Rico), may require an additional shipping fee. If this applies to your order, our customer service team will contact you before shipment.

Estimated delivery time for most standard orders: 7–13 business days (excluding order processing time).

For custom-made items, such as wheels or steering wheels, shipping times may vary. The estimated shipping time will be confirmed separately by our customer service team.

📌 Important Notes

Please make sure your shipping address and phone number are accurate and complete at checkout.

Tesgod is not responsible for delivery issues caused by incorrect or incomplete shipping information provided by the customer.

Additional charges may apply for remote or hard-to-reach areas.

💬 Need Help?

If you have any questions about shipping or delivery, please feel free to contact our customer support team at peng@tesgod.com. We are always happy to help.

Thank you for choosing Tesgod ❤️

At Tesgod LLC, we want you to enjoy a worry-free shopping experience. If you are not satisfied with your purchase, we are here to help.

🔄 30-Day Return Policy

You may request a return within 30 days of receiving your order.

Please contact us within this period to start the return process.

📦 Return Reasons & Fees

Defective, Damaged, or Incorrect Items

If the item you received is defective, damaged, or incorrect, we can offer you a full refund or a replacement.

All related costs will be covered by Tesgod.
Non-Quality Returns

For returns due to personal reasons, such as change of mind, style preference, color preference, or ordering the wrong item, a 15% restocking fee will apply.

Return shipping costs are the responsibility of the customer.

📝 How to Start a Return

Please contact us at peng@tesgod.com or through our live chat first.

Once your return request is approved, we will provide you with the return instructions.

Please do not send the item back without prior authorization, as unauthorized returns will not be accepted.

🚫 Non-Returnable Items

The following items cannot be returned unless there is a quality issue:

Customized products, such as steering wheels and rims

Gift cards

Hazardous materials or flammable items

If you are unsure whether your item is eligible for return, please contact us before making a purchase.

💰 Refunds & Exchanges

Once we receive and inspect your returned item, approved refunds will be issued to your original payment method within 1–3 business days.

Please note that the time it takes for the refund to appear in your account may vary depending on your bank or card issuer.

If you would like to exchange an item, we recommend returning the original item first and then placing a new order.

💬 Need Help?

Your satisfaction is important to us. If you have any questions, please feel free to contact us at peng@tesgod.com. We are always happy to help.

Thank you for choosing Tesgod ❤️