Magnetic Adjustable Mount for Starlink Mini

$67.31 USD $71.39 USD

Magnetic Adjustable Mount for Starlink Mini

Name: Magnetic Adjustable Mount for Starlink Mini
Brand: Teskay
SKU: SMM003
Price: 67.31 USD
Availability: InStock

$67.31 USD $71.39 USD

Order now, estimated delivery: Calculating...

Free shipping on orders over $99
30-day free returns & exchanges

Magnetic Adjustable Mount for Starlink Mini

Create a quick, removable Starlink Mini setup on compatible steel surfaces with a dual magnetic base and adjustable ball joint that lets you fine-tune dish angle without drilling into a vehicle, RV or other mounting surface.

24 magnets · Multi-angle adjustment · No vehicle drilling · Stationary use only

Magnetic adjustable mount holding a Starlink Mini on a vehicle roof

🧲

24-Magnet Base

Multiple magnets are distributed through the dual round magnetic bases to create strong contact with suitable flat ferromagnetic steel surfaces.

🔄

Multi-Angle Adjustment

An adjustable center joint lets you change the Starlink Mini orientation and then tighten the locking handle once the desired position is reached.

🛡️

Rubber-Coated Contact Surfaces

Rubberized magnetic bases increase surface friction while creating a softer barrier between the mount and compatible painted metal surfaces.

Why This Starlink Mini Mount Stands Out

🚙

Temporary vehicle-roof deployment

Place the mount on a compatible steel roof while parked, set the Mini angle and remove the entire setup when it is no longer required.

🏕️

Useful for portable campsite setups

The compact mount can be moved between suitable metal surfaces instead of permanently dedicating one location to the Starlink Mini.

🔧

No holes in the vehicle

The vehicle-side installation relies on magnetic attachment rather than screws drilled through a roof panel or permanent adhesive mounting plates.

📡

Adjustable dish positioning

Loosen the adjustment joint, reposition the Mini, then tighten the handle to hold the selected angle.

🎒

Compact removable hardware

The mount is small enough to remove from the vehicle and pack away with other Starlink Mini travel equipment.

Important — Do Not Use While Driving

The current manufacturer instructions explicitly state that this magnetic Starlink Mini mount should not be used while the vehicle is being driven. It is intended for temporary stationary deployment.

Designed for Flat Ferromagnetic Surfaces

Starlink Mini magnetic mount used on different flat iron surfaces

Steel / Iron

Suitable when the mounting surface is sufficiently flat, clean and strongly attracted to a magnet.

Aluminum

Standard aluminum is not ferromagnetic and will not provide the magnetic attachment required by this mount.

Glass / Fiberglass / Plastic

These surfaces cannot hold this mount magnetically without an additional suitable steel mounting structure.

Easy Compatibility Test

Before ordering, test the intended installation area with a normal magnet. If it does not attach firmly, this mount is not suitable for that surface.

Starlink Mini magnetic mount manufacturer advertised magnetic suction

79 lb Is a Manufacturer-Advertised Magnetic Suction Figure

Current product imagery advertises 79 lb of magnetic suction. Actual holding force varies with steel thickness, flatness, paint/coating, contamination, contact area and pull direction. This figure is not a vehicle-speed or road-use rating.

Quick Starlink Mini Setup

Starlink Starlink Mini Only

Mounting Surface Clean, Flat Ferromagnetic Steel / Iron

Vehicle Use Stationary / Parked Only

1. Check the Starlink Mini Base

Confirm that your Mini uses the earlier compatible base / pipe-adapter design. Do not proceed if your newer base has the three-hole configuration identified by the manufacturer.

2. Install the Mini Pipe Adapter

Insert the compatible Starlink Mini pipe adapter into the rear base of the dish according to the original Mini design.

3. Secure the Adapter Block

Lock the supplied mount-side adapter block to the compatible Mini pipe adapter using the corresponding fixing screws.

4. Attach the Magnetic Holder

Connect the adjustable magnetic mount assembly to the Mini adapter and confirm all fasteners are properly seated.

5. Clean the Metal Surface

Remove dust, grit and debris from both the magnetic pads and mounting surface before placement to reduce scratching and improve contact.

6. Adjust & Lock the Angle

Position the Starlink Mini as required, then tighten the adjustment handle before connecting power and beginning use.

Installation guide for Starlink Mini magnetic adjustable mount

Important Starlink Mini Base Compatibility

This mount is designed around the earlier / original Starlink Mini pipe-adapter arrangement. The manufacturer specifically warns that it is not compatible with the newer Mini base identified by three holes on the top.

Remove Before Driving

Do not drive with the Starlink Mini attached using this mount. Wind load, vibration, road impacts and lateral forces are different from static magnetic pull and can cause the assembly to move or detach.

Specifications

Attribute	Details
Product	Magnetic Adjustable Mount for Starlink Mini
Starlink Compatibility	Starlink Mini — Compatible Earlier / Original Pipe-Adapter Base Version
Newer 3-Hole Mini Base	Not Compatible According to Current Manufacturer Notice
Mounting Method	Dual Magnetic Base
Magnet Count	24 Magnets
Manufacturer-Advertised Magnetic Suction	79 lb Shown in Current Product Imagery
Suitable Surface	Clean, Flat Ferromagnetic Iron / Steel Surface
Glass Surface	Not Magnetically Compatible
Aluminum Surface	Not Magnetically Compatible
Fiberglass / Plastic	Not Magnetically Compatible
Angle Adjustment	Multi-Angle Adjustable Joint
Published Adjustment Range	Not Published
Magnetic Pad Protection	Rubberized Contact Coating
Main Bracket	Metal Construction — Exact Alloy Not Published
Color	Black
Vehicle Drilling	Not Required
Permanent Adhesive	Not Required
Use While Vehicle Is Moving	No — Manufacturer Explicitly Advises Against Driving With It Installed
Published Overall Dimensions	Not Published
Published Weight	Not Published
Starlink Mini Dish Included	No — Mount Accessory Only
Original Mini Pipe Adapter	Required Compatible Interface; Package Inclusion Not Clearly Published
Package	Magnetic Adjustable Mount Assembly + Mounting Hardware Shown in Current Product Images; Exact Packing List Not Fully Published

Quick Answers

Is this mount compatible with every Starlink Mini? +

No. The current manufacturer specifically warns that it is not compatible with the newer Mini base identified by three holes on the top.

How do I check my Starlink Mini before ordering? +

Inspect the rear/base area of your Mini. This product is designed around the earlier original pipe-adapter layout. If your newer Mini base has the manufacturer's three-hole top configuration, choose a different mount.

Can I drive with the Starlink Mini attached to this magnetic mount? +

No. The current manufacturer explicitly states not to use this mount while driving. Remove the Starlink Mini and mount before the vehicle moves.

Will it work on any car roof? +

No. The intended mounting area must be a sufficiently flat ferromagnetic steel or iron surface. Glass, aluminum and non-magnetic composite roofs will not hold the mount.

Can I use it on an RV? +

Yes only if the intended RV mounting area is flat, ferromagnetic steel. Many RV roofs are aluminum or fiberglass, so test the surface with a magnet first.

Can I use it on a boat? +

Only on a suitable stationary ferromagnetic steel surface. Fiberglass and aluminum boat surfaces will not provide the magnetic attachment this mount requires.

How many magnets does it use? +

Current manufacturer specifications state that the mount contains 24 strong magnets distributed through its magnetic bases.

Does it really have 79 lb of magnetic holding force? +

Current product imagery advertises 79 lb of magnetic suction. Actual real-world holding force depends heavily on the mounting surface and this figure is not a driving-speed rating.

Will the magnets scratch the roof? +

The magnetic bases use a rubberized coating intended to reduce direct metal-to-paint contact. Always clean both surfaces first because trapped grit can still scratch paint.

Can the Starlink Mini angle be adjusted? +

Yes. The center joint supports multi-angle positioning and can be locked using the adjustment handle. No exact degree range is currently published.

Does installation require drilling into my vehicle? +

No. Magnetic attachment does not require drilling holes into the vehicle-side mounting surface.

Does the Starlink Mini dish come with the mount? +

No. This listing is for the magnetic mounting accessory; the Starlink Mini itself is shown for installation reference.

Is the original Starlink Mini pipe adapter required? +

The current installation design is specifically shown mating to the original compatible Starlink Mini pipe adapter. The source does not clearly confirm that this Mini adapter is included with the magnetic mount.

Are the exact size and weight published? +

No verified overall dimensions or product weight are currently published, so this description does not invent those values.

You can contact Tesgod directly via the chat bubble in the bottom-right corner.
You can also reach our customer support team by emailing peng@tesgod.com.

We will respond to your message within 24 hours.

Yes, absolutely. Paying on Tesgod is safe and secure.

We use Shopify Payments, Shopify’s official payment system, to help ensure that every transaction is protected throughout the checkout process.

Bank-level security

Your payment information is encrypted and processed securely. We do not see or store your full card details.

Fraud protection

Shopify Payments uses advanced fraud detection and risk analysis tools to help prevent unauthorized transactions.

3D Secure verification

For some transactions, your bank may require additional verification to confirm that only the authorized cardholder can complete the payment.

Encrypted checkout

All payment data is protected with industry-standard encryption during the entire checkout process.

Trusted payment networks

Payments are processed through trusted global card networks such as Visa, Mastercard, and American Express.

In short, your payment on Tesgod is handled through a secure and trusted payment infrastructure used by millions of customers worldwide, so you can shop with confidence.

📦 Processing Time

Orders are usually processed within 48 business hours after payment confirmation.

Please note that processing times may be slightly longer during weekends, holidays, or peak periods.

Some Tesla-related tools or accessories may include labels or stickers inside the package for identification or packaging purposes.

🚚 Shipping & Delivery

We offer free worldwide shipping on orders over $99 USD.

Please note that certain remote areas, such as islands or locations with limited carrier access (including Puerto Rico), may require an additional shipping fee. If this applies to your order, our customer service team will contact you before shipment.

Estimated delivery time for most standard orders: 7–13 business days (excluding order processing time).

For custom-made items, such as wheels or steering wheels, shipping times may vary. The estimated shipping time will be confirmed separately by our customer service team.

📌 Important Notes

Please make sure your shipping address and phone number are accurate and complete at checkout.

Tesgod is not responsible for delivery issues caused by incorrect or incomplete shipping information provided by the customer.

Additional charges may apply for remote or hard-to-reach areas.

💬 Need Help?

If you have any questions about shipping or delivery, please feel free to contact our customer support team at peng@tesgod.com. We are always happy to help.

Thank you for choosing Tesgod ❤️

At Tesgod LLC, we want you to enjoy a worry-free shopping experience. If you are not satisfied with your purchase, we are here to help.

🔄 30-Day Return Policy

You may request a return within 30 days of receiving your order.

Please contact us within this period to start the return process.

📦 Return Reasons & Fees

Defective, Damaged, or Incorrect Items

If the item you received is defective, damaged, or incorrect, we can offer you a full refund or a replacement.

All related costs will be covered by Tesgod.
Non-Quality Returns

For returns due to personal reasons, such as change of mind, style preference, color preference, or ordering the wrong item, a 15% restocking fee will apply.

Return shipping costs are the responsibility of the customer.

📝 How to Start a Return

Please contact us at peng@tesgod.com or through our live chat first.

Once your return request is approved, we will provide you with the return instructions.

Please do not send the item back without prior authorization, as unauthorized returns will not be accepted.

🚫 Non-Returnable Items

The following items cannot be returned unless there is a quality issue:

Customized products, such as steering wheels and rims

Gift cards

Hazardous materials or flammable items

If you are unsure whether your item is eligible for return, please contact us before making a purchase.

💰 Refunds & Exchanges

Once we receive and inspect your returned item, approved refunds will be issued to your original payment method within 1–3 business days.

Please note that the time it takes for the refund to appear in your account may vary depending on your bank or card issuer.

If you would like to exchange an item, we recommend returning the original item first and then placing a new order.

💬 Need Help?

Your satisfaction is important to us. If you have any questions, please feel free to contact us at peng@tesgod.com. We are always happy to help.

Thank you for choosing Tesgod ❤️