LED Rear Bumper Reflector Lights for Model Y Juniper / YL

Fremont/Texas Giga / Left

$99.00 USD

LED Rear Bumper Reflector Lights for Model Y Juniper / YL

$99.00 USD

Manufacturing Plant Fremont/Texas Giga Shanghai/Berlin Giga

Position Left Right Left & Right

Order now, estimated delivery: Calculating...

Free shipping on orders over $99
30-day free returns & exchanges

LED Rear Bumper Reflector Lights for Model Y Juniper / Model YL

Restore a damaged lower rear bumper light with an OEM-spec LED assembly engineered to match the original mounting points, wiring interface, lighting behavior and factory appearance of the refreshed Model Y.

1:1 factory fit · Vehicle-matched lighting · Plug & play

LED Rear Bumper Reflector Lights for Tesla Model Y Juniper

💡

Vehicle-Matched LED Function

Designed to reproduce the lighting behavior of the original bumper lamp in that position, including the applicable turn-signal and safety-light functions for your vehicle configuration.

🎯

1:1 Factory Fit

Vehicle-specific housing geometry follows the original rear fascia mounting structure for clean bumper gaps and OEM-style positioning.

🔌

Plug-and-Play Connection

Connects through the factory-style electrical interface without cutting, splicing, or permanently modifying the original vehicle wiring.

Why This Rear Bumper Light Stands Out

🛠️

Direct replacement for a damaged factory unit

Replace a cracked, broken or failed lower bumper lamp without redesigning the rear lighting system or adding a universal aftermarket light.

↔️

Left, right or complete pair

Replace only the damaged side or choose the Left & Right option when both assemblies need to be renewed together.

🌎

Region-specific electrical versions

Fremont/Texas and Shanghai/Berlin versions are offered because regional Model Y vehicles use different rear-light wiring and lighting configurations.

🚨

Matches original lighting behavior

Whether the original vehicle uses a standard or sequential turn-signal behavior, the correct version is designed to follow the vehicle's original configuration.

⚙️

CAN-bus compatible electronics

Integrated resistors and vehicle-compatible electronics are designed to communicate correctly with the factory lighting system and avoid unnecessary dashboard warnings.

Replacement Part — Not a Decorative Add-On

This assembly replaces the original Fascia Marker Lamp / Bumper Reflex Lamp in the lower rear bumper. It is designed to occupy the original lamp position and connect to the vehicle's existing lighting system rather than being mounted over the factory reflector.

OEM-Style Housing & Factory Interface

Left LED rear bumper reflector lamp for Tesla Model Y Juniper

Left-Side Assembly

Complete molded lamp housing designed to replace the corresponding original left rear fascia unit.

Right LED rear bumper reflector lamp for Tesla Model Y Juniper

Right-Side Assembly

Mirror-image right-side housing follows the factory bumper mounting geometry for symmetrical replacement.

Left and right LED rear bumper reflector light set for Tesla Model Y Juniper

Left & Right Pair

Choose both sides when replacing a complete rear bumper lighting set or when both original assemblies are damaged.

Detailed LED and reflector lens structure of Model Y Juniper rear bumper light

Region-Matched Plug-and-Play Installation

Fremont / Texas Giga Version

Intended for the corresponding North American-style vehicle electrical configuration. Applicable markets listed by the manufacturer include the USA, Canada, Mexico and South Korea.

Shanghai / Berlin Giga Version

Intended for the corresponding European / APAC electrical configuration, including Europe, China, UK, Australia, New Zealand and similar markets.

1. Access the Rear Fascia

Access the original lower rear bumper lamp from the interior side of the rear fascia.

2. Remove 3 Torx T25 Screws

Release the original assembly by removing the three Torx T25 fasteners that secure the lamp to the rear fascia.

3. Disconnect the Factory Plug

Unplug the original electrical connector without cutting or altering the vehicle's wiring harness.

4. Install & Test

Connect the replacement lamp, reinstall the original mounting screws, then test all applicable lighting functions before completing reassembly.

Rear connector and factory mounting points on Model Y Juniper LED bumper light

Important: Choose the Correct Manufacturing Plant

Fremont/Texas and Shanghai/Berlin vehicles can use different rear-light wiring and functions. Select the version that matches your vehicle's original production configuration rather than choosing only by your current country of residence.

Specifications

Attribute	Details
Product	LED Rear Bumper Reflector Light Assembly
Primary Compatibility	Tesla Model Y Juniper 2025+
Additional Listing	Model YL
Not Compatible	Legacy Model Y 2020–2024 Rear Bumper
Part Type	Fascia Marker Lamp / Bumper Reflex Lamp Replacement
Light Source	LED
Lighting Behavior	Vehicle-Matched Factory Configuration
Turn Signal	Standard or Sequential According to Original Vehicle Configuration
Production Versions	Fremont/Texas Giga / Shanghai/Berlin Giga
Position Options	Left / Right / Left & Right
Vehicle Electronics	CAN-Bus Compatible with Built-In Resistors
Electrical Connection	Factory Plug-and-Play Connector
Mounting	3 × Torx T25 Fasteners at Rear Fascia
Wire Cutting	Not Required
Coding	Not Required

Quick Answers

Is this an add-on light or a replacement for the original bumper lamp? +

It is a complete replacement assembly for the original lower rear Fascia Marker Lamp / Bumper Reflex Lamp. The original unit is removed before this replacement is installed.

Will it fit a 2020–2024 Model Y? +

No. The 2025+ Model Y Juniper uses a redesigned rear fascia, so this lamp does not fit the original 2020–2024 Model Y bumper.

Why do I need to choose Fremont/Texas or Shanghai/Berlin? +

Different production regions can use different rear-light wiring and lighting behavior. Select the version that matches your vehicle's original manufacturing configuration.

Does it use a sequential turn signal? +

The correct version is designed to follow your vehicle's original configuration. If the original lamp uses a sequential signal, the replacement follows that behavior; vehicles with a standard signal retain the corresponding standard behavior.

Can I replace only one side? +

Yes. Left and Right are available individually, and a Left & Right option is available when both sides need replacement.

Do I need to cut wires or program the vehicle? +

No. The replacement uses the existing factory connector and is designed for plug-and-play installation without wire cutting, splicing, or additional coding.

How is the light physically installed? +

The lamp is secured to the rear fascia with three Torx T25 screws accessible from the interior side of the bumper, then connected to the original factory electrical connector.

You can contact Tesgod directly via the chat bubble in the bottom-right corner.
You can also reach our customer support team by emailing peng@tesgod.com.

We will respond to your message within 24 hours.

Yes, absolutely. Paying on Tesgod is safe and secure.

We use Shopify Payments, Shopify’s official payment system, to help ensure that every transaction is protected throughout the checkout process.

Bank-level security

Your payment information is encrypted and processed securely. We do not see or store your full card details.

Fraud protection

Shopify Payments uses advanced fraud detection and risk analysis tools to help prevent unauthorized transactions.

3D Secure verification

For some transactions, your bank may require additional verification to confirm that only the authorized cardholder can complete the payment.

Encrypted checkout

All payment data is protected with industry-standard encryption during the entire checkout process.

Trusted payment networks

Payments are processed through trusted global card networks such as Visa, Mastercard, and American Express.

In short, your payment on Tesgod is handled through a secure and trusted payment infrastructure used by millions of customers worldwide, so you can shop with confidence.

📦 Processing Time

Orders are usually processed within 48 business hours after payment confirmation.

Please note that processing times may be slightly longer during weekends, holidays, or peak periods.

Some Tesla-related tools or accessories may include labels or stickers inside the package for identification or packaging purposes.

🚚 Shipping & Delivery

We offer free worldwide shipping on orders over $99 USD.

Please note that certain remote areas, such as islands or locations with limited carrier access (including Puerto Rico), may require an additional shipping fee. If this applies to your order, our customer service team will contact you before shipment.

Estimated delivery time for most standard orders: 7–13 business days (excluding order processing time).

For custom-made items, such as wheels or steering wheels, shipping times may vary. The estimated shipping time will be confirmed separately by our customer service team.

📌 Important Notes

Please make sure your shipping address and phone number are accurate and complete at checkout.

Tesgod is not responsible for delivery issues caused by incorrect or incomplete shipping information provided by the customer.

Additional charges may apply for remote or hard-to-reach areas.

💬 Need Help?

If you have any questions about shipping or delivery, please feel free to contact our customer support team at peng@tesgod.com. We are always happy to help.

Thank you for choosing Tesgod ❤️

At Tesgod LLC, we want you to enjoy a worry-free shopping experience. If you are not satisfied with your purchase, we are here to help.

🔄 30-Day Return Policy

You may request a return within 30 days of receiving your order.

Please contact us within this period to start the return process.

📦 Return Reasons & Fees

Defective, Damaged, or Incorrect Items

If the item you received is defective, damaged, or incorrect, we can offer you a full refund or a replacement.

All related costs will be covered by Tesgod.
Non-Quality Returns

For returns due to personal reasons, such as change of mind, style preference, color preference, or ordering the wrong item, a 15% restocking fee will apply.

Return shipping costs are the responsibility of the customer.

📝 How to Start a Return

Please contact us at peng@tesgod.com or through our live chat first.

Once your return request is approved, we will provide you with the return instructions.

Please do not send the item back without prior authorization, as unauthorized returns will not be accepted.

🚫 Non-Returnable Items

The following items cannot be returned unless there is a quality issue:

Customized products, such as steering wheels and rims

Gift cards

Hazardous materials or flammable items

If you are unsure whether your item is eligible for return, please contact us before making a purchase.

💰 Refunds & Exchanges

Once we receive and inspect your returned item, approved refunds will be issued to your original payment method within 1–3 business days.

Please note that the time it takes for the refund to appear in your account may vary depending on your bank or card issuer.

If you would like to exchange an item, we recommend returning the original item first and then placing a new order.

💬 Need Help?

Your satisfaction is important to us. If you have any questions, please feel free to contact us at peng@tesgod.com. We are always happy to help.

Thank you for choosing Tesgod ❤️