Real Dry Carbon Fiber Door Sill Strip Overlay for Tesla Model 3/Y
-
Order now, estimated delivery: Calculating...
Free shipping on orders over $99
-
30-day free returns & exchanges
Product Description
Real Dry Carbon Fiber Door Sill Covers for Tesla Model 3 & Model Y
Protect high-contact Tesla entry areas from everyday shoe scuffs, dirt and scratches while upgrading the cabin with genuine dry carbon fiber — precision shaped for the door sill rather than printed ABS or carbon-look vinyl.
Genuine Dry Carbon Fiber
Constructed from real carbon fiber rather than ABS plastic with a printed carbon pattern, giving the entry area authentic weave depth and a lightweight rigid structure.
Protects High-Contact Sill Areas
Creates a physical overlay over vulnerable entry surfaces to help reduce scuffs and scratches caused by shoes, dirt and repeated entry or exit.
No-Drill Adhesive Installation
Pre-applied automotive adhesive allows the carbon pieces to install directly over the original sill surface without screws, drilling or removal of the factory trim.
Why Real Carbon Makes a Difference
The traditional glossy and matte options show a real woven carbon pattern with natural depth that printed carbon-look plastic cannot reproduce.
Choose Glossy for stronger reflections, Matte for a more understated OEM-style finish, or Glossy Forged for the irregular chopped-carbon appearance.
Each version follows the corresponding Tesla entry trim and latch-area geometry instead of relying on a universal flat strip.
Designed to sit closely over the existing door sill so normal door operation is retained when the correct model-specific pieces are aligned and installed properly.
The finished carbon surface can be wiped clean after everyday exposure to dust and shoe marks while helping protect the original sill underneath.
Real Carbon — Not Carbon-Look ABS
This product is listed as Real Dry Carbon Fiber. Glossy, Matte and Glossy Forged describe the available carbon surface styles; they are not printed ABS “carbon-fiber texture” variants.
Three Carbon Fiber Finishes
Precision Fit with Simple Adhesive Installation
Door-sill shapes differ between legacy Model 3/Y and refreshed Highland / Juniper vehicles. Select the exact version matching your Tesla.
Remove dust, wax, grease and detailing residue from the installation area and allow the surface to dry completely.
Place each carbon piece over its intended sill position and verify orientation, edge alignment and latch clearance before exposing the adhesive.
Use the supplied adhesion promoter on the intended bonding area according to the included instructions and allow it to become ready for application.
Remove the adhesive liner gradually, align the carbon overlay carefully and press firmly across the entire piece to establish even contact.
Open and close the corresponding door carefully after installation and confirm the overlay does not contact the door seal or surrounding trim.
The current manufacturer recommends installing at temperatures above 15°C / 59°F. In colder conditions, gently warming the adhesive and sill area can help improve initial bonding. Avoid overheating painted or plastic surfaces.
These are overlay pieces. The original Tesla sill remains in place underneath and no screws, drilling or vehicle wiring modification is required.
Specifications
| Attribute | Details |
|---|---|
| Product | Real Dry Carbon Fiber Door Sill Strip Covers |
| Material | Genuine Dry Carbon Fiber |
| Finish Options | Glossy / Matte / Glossy Forged |
| Model 3 Legacy | 2017–2023 |
| Model 3 Highland | 2024+ |
| Legacy Model Y | Current TESGOD Selector: 2020–2024 |
| New Model Y | Current TESGOD Selector: 2025+ |
| Model YL | Manufacturer Source Lists 2026+; Not Yet a Dedicated TESGOD Option |
| Installation Area | Front / Rear Door Sill Entry Areas Depending on Selected Set |
| Manufacturer Quantity Options | 2 Pcs Front Door / 4 Pcs Front & Rear Door |
| Current TESGOD Quantity Selector | No Separate 2-Piece / 4-Piece Variant Currently Displayed |
| Mounting Method | Pre-Applied 3M Automotive Adhesive |
| Adhesion Promoter | Manufacturer Package Lists 1 Pc |
| Drilling | Not Required |
| Original Trim Removal | Not Required |
| Vehicle Wiring | No Electrical Connection Required |
| Recommended Installation Temperature | Above 15°C / 59°F |
| Published Thickness | Not Published |
| Published Weight | Not Published |
| Package | Door Sill Carbon Fiber Overlay Set + Adhesion Promoter; Exact Piece Count Should Follow the Active TESGOD Product Variant |
Quick Answers
Is this genuine carbon fiber or ABS with a carbon pattern? +
It is listed as genuine dry carbon fiber. It is not the ABS carbon-fiber-texture type used on some lower-cost decorative accessories.
Which finishes are available? +
Current options are Glossy, Matte and Glossy Forged.
Does it fit Model 3 Highland? +
Yes. Select the dedicated Model 3 Highland 2024+ version.
Does it fit Model Y Juniper? +
Yes. The current manufacturer source lists Model Y Juniper 2025+, while TESGOD currently groups the refreshed Model Y under its New Model Y 2025+ option.
Does it fit Model YL? +
The current manufacturer source lists Model YL 2026+, but TESGOD has not yet added a dedicated Model YL selector. Confirm the exact sill geometry before ordering for Model YL.
Are there 2-piece and 4-piece sets? +
The latest manufacturer source offers 2 Pcs for the front doors and 4 Pcs for front and rear doors. The current TESGOD selector does not yet display a separate quantity option, so the active TESGOD SKU should be checked for the exact package quantity.
Does installation require removing the original sill trim? +
No. These are overlays that install directly over the corresponding original sill surface.
Is drilling required? +
No. The carbon pieces use automotive adhesive and do not require drilling or screws.
What adhesive is used? +
The current manufacturer specifies pre-applied 3M automotive adhesive.
Can it be installed in cold weather? +
For best adhesion, the current manufacturer recommends an installation temperature above 15°C / 59°F. In colder conditions, gently warming the adhesive can improve bonding.
Will the carbon overlays interfere with the doors? +
They are designed with a thin model-specific profile to preserve normal door operation. Always test-fit each piece and verify clearance before removing the adhesive liner.
Can the overlays be removed later? +
Yes. Gently warming the adhesive and slowly removing the overlay can reduce removal force and adhesive residue. Avoid pulling cold carbon pieces sharply away from the painted or plastic sill surface.
Are thickness and weight published? +
No verified overall thickness or set weight is currently published, so this description does not invent those values.
How can I contact Tesgod?
- You can contact Tesgod directly via the chat bubble in the bottom-right corner.
- You can also reach our customer support team by emailing peng@tesgod.com.
We will respond to your message within 24 hours.
Is it safe to make a payment on Tesgod?
Yes, absolutely. Paying on Tesgod is safe and secure.
We use Shopify Payments, Shopify’s official payment system, to help ensure that every transaction is protected throughout the checkout process.
Bank-level security
Your payment information is encrypted and processed securely. We do not see or store your full card details.
Fraud protection
Shopify Payments uses advanced fraud detection and risk analysis tools to help prevent unauthorized transactions.
3D Secure verification
For some transactions, your bank may require additional verification to confirm that only the authorized cardholder can complete the payment.
Encrypted checkout
All payment data is protected with industry-standard encryption during the entire checkout process.
Trusted payment networks
Payments are processed through trusted global card networks such as Visa, Mastercard, and American Express.
In short, your payment on Tesgod is handled through a secure and trusted payment infrastructure used by millions of customers worldwide, so you can shop with confidence.
Shipping Policy
📦 Processing Time
Orders are usually processed within 48 business hours after payment confirmation.
Please note that processing times may be slightly longer during weekends, holidays, or peak periods.
Some Tesla-related tools or accessories may include labels or stickers inside the package for identification or packaging purposes.
🚚 Shipping & Delivery
We offer free worldwide shipping on orders over $99 USD.
Please note that certain remote areas, such as islands or locations with limited carrier access (including Puerto Rico), may require an additional shipping fee. If this applies to your order, our customer service team will contact you before shipment.
Estimated delivery time for most standard orders: 7–13 business days (excluding order processing time).
For custom-made items, such as wheels or steering wheels, shipping times may vary. The estimated shipping time will be confirmed separately by our customer service team.
📌 Important Notes
Please make sure your shipping address and phone number are accurate and complete at checkout.
Tesgod is not responsible for delivery issues caused by incorrect or incomplete shipping information provided by the customer.
Additional charges may apply for remote or hard-to-reach areas.
💬 Need Help?
If you have any questions about shipping or delivery, please feel free to contact our customer support team at peng@tesgod.com. We are always happy to help.
Thank you for choosing Tesgod ❤️
Refund Policy
At Tesgod LLC, we want you to enjoy a worry-free shopping experience. If you are not satisfied with your purchase, we are here to help.
🔄 30-Day Return Policy
You may request a return within 30 days of receiving your order.
Please contact us within this period to start the return process.
📦 Return Reasons & Fees
- Defective, Damaged, or Incorrect Items
If the item you received is defective, damaged, or incorrect, we can offer you a full refund or a replacement.
All related costs will be covered by Tesgod. - Non-Quality Returns
For returns due to personal reasons, such as change of mind, style preference, color preference, or ordering the wrong item, a 15% restocking fee will apply.
Return shipping costs are the responsibility of the customer.
📝 How to Start a Return
Please contact us at peng@tesgod.com or through our live chat first.
Once your return request is approved, we will provide you with the return instructions.
Please do not send the item back without prior authorization, as unauthorized returns will not be accepted.
🚫 Non-Returnable Items
The following items cannot be returned unless there is a quality issue:
Customized products, such as steering wheels and rims
Gift cards
Hazardous materials or flammable items
If you are unsure whether your item is eligible for return, please contact us before making a purchase.
💰 Refunds & Exchanges
Once we receive and inspect your returned item, approved refunds will be issued to your original payment method within 1–3 business days.
Please note that the time it takes for the refund to appear in your account may vary depending on your bank or card issuer.
If you would like to exchange an item, we recommend returning the original item first and then placing a new order.
💬 Need Help?
Your satisfaction is important to us. If you have any questions, please feel free to contact us at peng@tesgod.com. We are always happy to help.
Thank you for choosing Tesgod ❤️
How to view the installation video?
You may also like
Free Shipping
Free worldwide shipping over $99
Secure Payment
100% secure payment processing
Easy Returns
30-day return policy on all items(Customized products excluded)
Service Excellence
Fast customer support response service