Breathable Cooling Seat Cushion for Tesla Model 3 & Model Y

Breathable Cooling Seat Cushion for Tesla Model 3 / Model Y

Add a cooler, more breathable contact layer to your Tesla seats with a cotton-linen surface and 3D mesh structure designed to improve passive airflow. The fitted cushion helps reduce heat and moisture buildup while also adding a protective layer over the original seat surface.

Passive Cooling Through Airflow

The cooling effect comes from the breathable textile surface and 3D mesh structure, which help air circulate between the occupant and the seat. No electrical connection, fan or powered cooling system is required.

⚠️ This Is Not an Electrically Ventilated Seat

This cushion does not contain fans, compressors or electronic cooling components. “Cooling” refers to passive heat dissipation and airflow through the breathable material structure. Actual comfort depends on cabin temperature, clothing, humidity and driving conditions.

Designed for Warm-Weather Driving

Less Heat Buildup
The breathable structure helps reduce direct heat accumulation between your body and the seat surface.

Moisture Management
Airflow through the mesh helps reduce the feeling of trapped moisture during longer drives or warm-weather use.

Additional Seating Comfort
The textile and mesh layers provide an additional contact surface over the original seat without requiring a powered ventilation system.

Breathable Multi-Layer Construction

Vehicle Compatibility

⚠️ Confirm Your Seat Layout

The supplier lists Model 3 and Model Y across all years. Because seat shapes and trim details can change between production generations, compare the product configuration with your actual seat layout before ordering, especially on refreshed vehicles.

Keeps the Seat-Side Area Uncovered

The supplier specifically describes the cushion as avoiding coverage of the seat-side area so the factory side-airbag zone is not wrapped by the cushion.

⚠️ Do Not Cover Seat-Mounted Airbag Areas

This product is an aftermarket seat cushion and is not presented as an airbag-certified safety component. After installation, make sure no cushion edge, strap or attachment covers or crosses the factory seat-mounted airbag seam or side deployment area.

Check Factory Seat Functions After Installation

After fitting the selected cushion set, confirm that the seat can still move through its normal adjustment range.

Make sure seat belts, buckles, ISOFIX / LATCH areas and seat controls remain accessible where applicable.

If the cushion shifts or interferes with any factory restraint or seat function, reposition or remove it before driving.

Seat Set Options

Choose the Correct Seat Set

Package contents depend on the selected configuration. The supplier currently offers 2-piece, 4-piece, 7-piece and rear 3-piece sets, so do not assume every order includes cushions for the entire vehicle.

Color Options

Logo Detail

TESGOD currently lists this breathable seat cushion as the version with logo detailing.

Helps Protect the Original Seat Surface

Daily Friction
Adds another contact layer between clothing and the factory seat surface.

Light Surface Contamination
Helps reduce direct contact with dust, crumbs and small everyday marks.

Removable Interior Accessory
The cushion can be cleaned separately rather than repeatedly cleaning the original seat surface.

⚠️ Not a Waterproof Seat Liner

The supplier states that the cushion can help protect the seat from light spills, but the breathable cotton-linen and mesh structure should not be treated as waterproof or liquid-proof. Blot spills promptly and remove the cushion for cleaning when necessary.

Installation Overview

1. Confirm the Selected Seat Set
Identify the front, rear or complete set supplied with your selected configuration.

2. Clean the Seat Surface
Remove dust and loose debris before placing the cushion on the factory seat.

3. Position the Cushion
Center each cushion over the corresponding seat contact area.

4. Secure the Cushion
Use the supplied retention points in their intended locations and make sure the cushion sits flat.

5. Check the Seat Sides
Make sure the cushion does not extend over the factory side-airbag deployment area.

6. Test Before Driving
Sit in the seat, move through the normal adjustment range and confirm that the cushion remains stable and does not interfere with any seat or restraint function.

Non-Slip Custom-Fit Design

The supplier describes the cushion as using a non-slip custom-fit design to help keep it positioned on compatible Model 3 and Model Y seating surfaces during normal use.

⚠️ Do Not Drive With a Loose or Sliding Cushion

Before driving, make sure the seat cushion remains securely positioned under normal body movement. If it slides, bunches or interferes with pedals, seat controls or restraints, stop using it until the installation is corrected.

Cleaning & Care

Routine Cleaning
Spot cleaning is recommended for dust, small marks and everyday maintenance.

Deeper Cleaning
The supplier recommends gentle hand washing when a more thorough clean is required.

Avoid Harsh Chemicals
Do not use bleach, aggressive solvents or abrasive cleaners on the textile surface.

Air Dry
Allow the cushion to air dry completely before reinstalling it in the vehicle.

Specifications

⚠️ Unpublished Specifications

The current product page does not publish exact cushion dimensions, thickness, weight, cotton-to-linen fiber percentages, mesh density, tested temperature reduction or certified cooling-performance data. Do not add specific temperature-drop claims unless they are separately verified for this exact product.

Package Configuration

Front Row Single Seat: 2-Piece Set

Front Row Two Seats: 4-Piece Set

Front & Rear Row Seats: 7-Piece Set

Rear Seats: 3-Piece Set

Quick Answers